Suction point from interior drain tile
System manometer shows the system is functioning
Garage attic installation with insulation
Added height for better port seal
With Vals help, I am operating a very efficient system at just 15 watts with a static pressure of 0.6" with constant radon level of 1.3.Tip - When installing the 4" access plug, cutting a 4" piece of PVC to raise it up allows it to seal easier. (It is now expanding against the lexan cover and not under it).
Click here to post comments
Join in and write your own page! It's easy to do. How? Simply click here to return to Do It Yourself Radon Mitigation Systems.
Oct 12, 17 08:49 PM
Radon readings before mitigation were 40pCi/l. Browsing the site, I picked out all the pieces needed for the system and gave Val a call to discuss. Val
Aug 28, 17 03:11 PM
Val – Just wanted to share. Got my radon system installed over the weekend took me roughly 16 hours for entire system. I’ve attached some pictures.
Aug 28, 17 03:01 PM
Having contemplated pipe sizes for my radon system I wanted to switch from 4 to 3 pipe after I had already ordered from Val. Luckily it had not shipped
By Val Riedman Copyright © 2007-2017 Indoor-Air-Health-Advisor.com
Build Your Own Website with Solo Build It!